SUL 18 1h 220V-240V 16(4)A 24 Hours time switch
| Categories | Time Switch |
|---|---|
| Album | View larger image |
| Update Time | 2019-08-26 |
Function
|
Analogue time switch |
|
1 channel |
|
Daily program |
|
Quartz controlled |
|
Shortest switching time: 30 minutes |
|
Fine adjustment for time setting accurate to the minute |
|
Simple summer/winter time correction |
48 switching segments |
Screw terminals |
witching preselection |
Manual switching with continuous ON/AUTO/continuous OFF |
|
Permanent ON/OFF switch |
Switching status display |
Operating indication |
SUL181h ：With power reserve (NiMH rechargeable battery) |
SYN161h：Without power reserve |
Billboard or Showcase lighting |
|
Air-condition or Commercial Refrigeration |
|
Pumps/Motor/Geyser/Fan Control |
|
Hydroponic Systems |
|
Wastewater Treatment Systems |
|
Generator Exercising |
|
Boilers / Heater Control |
Pool & Spa |
|
Type
|
SUL181h/SYN161h |
|
Operating voltage |
230-240 VAC / 110VAC / 24VDC / 12VDC |
Frequency | 50-60Hz |
Number of channels | 1 |
Width | 3 modules |
Installation type | DIN-rail |
Type of connection | Screw terminals |
Drive | Quartz-controlled stepper motor |
Program | Daily program |
Power reserve | 7 days |
Max. switching capacity at 250 V AC, cos φ = 1 | 16 A |
Max. switching capacity at 250 V AC, cos φ = 0.6 | 4 A |
Incandescent/halogen lamp load | 1100W |
LED lamp < 2 W | 20W |
LED lamp > 2 W | 180W |
Shortest switching time | 30 min |
Programmable every | 30 min |
Number of switching segments | 48 |
Time accuracy at 25 °C | ≤ ± 2 s/day(Quartz) |
Type of contact | Changeover contact |
Switching output | Potential-free and phase-independent |
Power consumption | 1.5VA |
Test approvals | CE |
Housing and insulation material | High-temperature resistant, self-extinguishing thermoplastic |
Type of protection | IP 20 |
Protection class | II in accordance with EN 60730-1 |
Ambient temperature | –10 °C … +50 °C |
Our Sales team: Professional Exporting team with more than 15 years of experience. all our follow-up service is individual one-to-one. All your comments will be replied in 24 hours. Products are exported to more than 60 countries with over 200 clients.
Delivery:The effective production departments enable us to delivery the goods in time And each customer will be noticed about the delivery time soon after order confirm, and to make sure customer’s benefit.
Quality control: we accept OEM & ODM customization mass quantity production. Following ISO9001:2015 system, the products are produced by automatic line, all products must pass strict inspection for several times, before leaving factory, including the supervisor and machine inspection. Factory audit could be available to our customers if necessary.
