English
Español
| Categories | Time Relay |
| Model | ZHRT1-ST |
| Rated control supply voltage | AC110V. AC220V. AC380V 56/60Hz |
| Rated power consumption | AC:≤1.5VA DC:≤1W |
| Delay range | 0.1s~10min |
| Setting accuracy | ≤5% |
| Repeat accuracy | ≤0.2% |
| Repeat power- on interval | ≥200ms |
| Altitude | ≤2000m |
| Contact configuration capacity(A) | 5A |
| IP Class | IP 20 |
| Use category | AC-15 |
Function
Applications
Used in air conditioning units, elevator machine room, pumps, fans and other motor control applications, as protection of over-voltage, under voltage, phase failure, phase sequence and phase unbalance. When the power supply is abnormal, turn off power supply to protect the equipment.
Features
Built-in microprocessors,knob setting,start time and conversion time adjustable.LED indicator shows working status. Conversion control of stardelta,auto buck starting. DIN-rail mounting.
| Rated control supply voltage | AC110V、AC220V、AC380V 50/60Hz |
| Rated power consumption | AC:≤1.5VA DC:≤1W |
| Delay range | 0.1s~ 300min |
| Setting accuracy | ≤±5% |
| Repeat accuracy | ≤±0.2% |
| Repeat power-on interval | ≥200ms |
| Electrical life | 105 |
| Mechanical life | 106 |
| Altitude | ≤2000m |
| Contact configuration capacity(A) | 5A |
| IP Class | IP20 |
| Class of pollution | III |
| Use category | AC-15 |
| Contact capacity , | Ue/le AC240V/1.5A. AC380V/0.95A |
| Contact capacity | 2 NO |
| Standard Guide | width:35mm(IEC/EN60715) |
Function Diagram
Wiring Diagram
Dimensions
> What Makes a Charging Connector Reliable for Daily EV Charging?
A Charging Connector is more than a cable end—it’s the critical interface between the EV and the charger. With GB, EU, and US standard options, mechanical life of ≥1...
> How Often Should You Inspect and Maintain Your Charging Connector?
Your EV charging connector is the most frequently handled component in your charging infrastructure. Every day, it gets plugged in, unplugged, dropped, stepped on, a...
> How Does a Liquid Level Relay Automate Your Water Pump?
Automatic water pump control using liquid level relay. Wiring diagrams for fill and drain modes, electrode selection, and troubleshooting.
> How to Diagnose a Failing Surge Protective Device (SPD) – Step‑by‑Step Troubleshooting
SPD failed without visible damage? Learn to check status indicators, measure leakage current, and know when to replace.