English
Español
| Categories | Electrical Distribution Box |
| material | metal |
| Product name | 8 way distribution box |
| Certificate | CE |
| Standard | IEC60898 |
| Rated voltage | 230/400V |
| inside intallation | terminal |
| IP grade | IP20 |
| Rated frequency | 50/60 Hz |
| Mounting ways | screw mounting on the wall |
| weisite | www.sofielec.com |
Product picture
General Characteristics
2MEC Series Metal consumer unit is designed for safe, reliable distribution and
control of electrical power as service entrance equipment in residential, commercial
and light industrial installations. It had reasonable design and economic cost.
1. Manufactured from powder coated sheet steel with Epoxy polyester coating.
2. Neutral & Earth terminal link bars assembled.
3. Preformed cables or Flexible wires connected on Ferruled terminals.
4. IP40 standard suit to indoor use only.
5. Standard: EN 60989 & EN 61008.
Technical Data
|
Metal clad Modular Enclosure Dimensions(mm) |
|||
|
Part No. |
Height |
Width |
Depth |
|
MEC2 |
145mm |
80mm |
62mm |
|
MEC2M |
145mm |
80mm |
62mm |
|
MEC4 |
225mm |
115mm |
62mm |
|
MEC4M |
240mm |
130mm |
85mm(105mm inc lid) |
Dimension
> How Does an SPD Surge Protective Device Clamp Transients?
An SPD Surge Protective Device in the XZ-NPE series uses spark-gap technology to clamp neutral-to-earth transients at 275V, with 20kA/40kA ratings and a <25ns respon...
> How Does a Metal Distribution Box Protect UK Circuits?
A Metal Distribution Box like the CJDB series protects circuit breakers in UK consumer units with 100A rating, IP3X safety, and 4-way to 22-way configurations.
> Is an SPD Surge Protective Device Rated for 80kA Imax?
An SPD Surge Protective Device with 5-80kA discharge capacity, built-in disconnector, and visual status window — built for low-voltage distribution system protection...
> Does a Float Switch Need IP68 for Hot Water?
A Float Switch with IP68 sealing, AC 220V rating, and 60°C water temperature tolerance — built for reliable liquid level control in pumps and tanks.