Basic Information
■Thread spec. :Metrtic
■Material: Parts A, C,E are made of UL approved nylon PA66,parts B and D are made of Nitrile butadiene rubber (NBR).
■Working temperature:-40℃ to 100℃ in static state, instantaneous heat resistance up to 120℃;-20℃ to 80℃ in dynamic state, instantaneous
heat resistance up to 100℃.
■Characteristics: Special design of clamping die and rubber part, large range in clamping cable,ultra-strong stretching resistance, waterproof,
dustproof, and high abilty to resist slt, acid, alkali, alcohol, grease and general solvent.
Schematic

technical parameter

> Why Does a Wi-Fi MCB Need a Neutral Connection?
A Wi-Fi MCB combines a miniature circuit breaker with a remote reclosing function, so a tripped circuit can be restored over the network instead of by hand at the pa...
> Can an Isolating Switch Break a 150A Load?
An Isolating Switch rated IP65 in a PC plastic enclosure keeps dust and water out while the rotary handle stays accessible for load-breaking. Here's how that combina...
> Can SPD Surge Protective Device Prevent Fires?
An SPD Surge Protective Device for single-phase 230V systems handles 50kA–100kA surge currents, with a dedicated backup protector preventing fire risk when the MOV r...
> How Does a Circuit Breaker Fit an 18mm Module?
A Circuit Breaker in an 18mm single-module RCBO delivers 6kA short-circuit protection, 1P+N switching, and B or C curve tripping for compact final distribution board...

.jpg)


