English
Español
■Thread spec: PG
■Material: Parts A. C,E are made of UL approved nyon PA66.parts B and D are made of ntile butadiene rubber (INBR).
■Working temperature:-40℃ to 100℃ in static state, instantaneous heat resistance up to 120℃;-20℃ to 80℃in aynamic state, instantaneous
heat resistance up to 100℃.
■Characteristics: Speclal design of clamping die and rubber part. large range in clamping cable,ultra-strong stretching resistance, waterproof,
dustproof, and high ability to resist salt, acid, alkal, alcchol, grease and general solvent.
Schematic
technical parameter
> Why Does Your Electrical System Need a Residual Current Circuit Breaker?
A Residual Current Circuit Breaker RCCB is an electromagnetic device that protects people and equipment from electric shock and ground faults. It continuously monito...
> How Does a Liquid Level Relay Automate Your Water Pump?
A Liquid Level Relay automates pump control using conductive electrodes—no PLC required. This guide covers fill/drain modes, electrode selection, wiring, and trouble...
> What Makes a Charging Connector Reliable for Daily EV Charging?
A Charging Connector is more than a cable end—it’s the critical interface between the EV and the charger. With GB, EU, and US standard options, mechanical life of ≥1...
> How Often Should You Inspect and Maintain Your Charging Connector?
Your EV charging connector is the most frequently handled component in your charging infrastructure. Every day, it gets plugged in, unplugged, dropped, stepped on, a...