English
Español
The release device is connected in series with the protected circuit. When the circuit fails, the electromagnetic suction contact separates and cuts off the circuit to form a protective effect
Main technical parameters
| Features | Company | (Electromagnetic release) test parameters | |
| 40A(160Turn) | 63A (500Turn) | ||
| Action Current | mA | 30mA | 30mA |
| Trip Current | mA | 7-9 | 2-3 |
| Tripping Voltage | mV | 15-20 | 40-60 |
| lmpedance Value | Ohms | 2.5-4.6 | 30-45 |
| Resistance | Ohms | 1.3-1.6 | 8.6-8.9 |
| Thrust | mm | h=0.5mm F ≥0.7N | h=0.5mm F ≥0.7N |
| N | h=1.0mm F ≥0.4N | h=1.0mmF ≥0.4N | |
| mm | h=1.6mm F ≥0.2N | h=1.6mm F ≥ 0.2N | |
| Push Rod Free Stroke | mm | 1.8 | 1.8 |
| Suggested Operating Body Restoring Force | N | 1.2-1.3 | 1.2-1.3 |
| Suggested Recovery Rate | m/Sec. | 0.5-0.8 | 0.5-0.8 |
| Ambient Temperature | Centigrade | -25℃ to 80℃ | -25℃ to 80℃ |
| Average Life Span | cycles | >5000 | >5000 |
| climate Test Criteria | IEC61008/EN61008 tested |
IEC61008/EN61008 tested |
|
| Traverse Length | mm | 100±5 | 100±5 |
> How Does a Metal Distribution Box Protect UK Circuits?
A Metal Distribution Box like the CJDB series protects circuit breakers in UK consumer units with 100A rating, IP3X safety, and 4-way to 22-way configurations.
> Is an SPD Surge Protective Device Rated for 80kA Imax?
An SPD Surge Protective Device with 5-80kA discharge capacity, built-in disconnector, and visual status window — built for low-voltage distribution system protection...
> Does a Float Switch Need IP68 for Hot Water?
A Float Switch with IP68 sealing, AC 220V rating, and 60°C water temperature tolerance — built for reliable liquid level control in pumps and tanks.
> Does a Circuit Breaker Need Both Overcurrent and Leakage Protection?
A magnetic RCBO that combines overcurrent and earth leakage protection in a compact two-module design — featuring 10kA breaking capacity and CE approval for resident...