English
Español
Categories
1. The entire series is equipped with large factory chip
rectifier bridges as standard,
with high resistance to reverse voltage up to 600V
2. Selecting large factory LED chips for better brightness and
durability
3. The latest structure in the industry, with integrated lamp
caps and fewer solder joints, makes the structure more stable
4. The latest design in the industry, with the same power
consumption and no heat generation (measurable), is safer
5. The power consumption of the company's new signal light is 0.1W
and does not generate heat
Related Products
News Center
> Can an Isolating Switch Break a 150A Load?
An Isolating Switch rated IP65 in a PC plastic enclosure keeps dust and water out while the rotary handle stays accessible for load-breaking. Here's how that combina...
> Can SPD Surge Protective Device Prevent Fires?
An SPD Surge Protective Device for single-phase 230V systems handles 50kA–100kA surge currents, with a dedicated backup protector preventing fire risk when the MOV r...
> How Does a Circuit Breaker Fit an 18mm Module?
A Circuit Breaker in an 18mm single-module RCBO delivers 6kA short-circuit protection, 1P+N switching, and B or C curve tripping for compact final distribution board...
> How Does an SPD Surge Protective Device Clamp Transients?
An SPD Surge Protective Device in the XZ-NPE series uses spark-gap technology to clamp neutral-to-earth transients at 275V, with 20kA/40kA ratings and a <25ns respon...